(EVSE) (DC charging cable, with a vehicle charging plug and free line end, used to quickly
charge the electric vehicle (EV) through the CCS 2 vehicle socket, which is used to install it
at an electric vehicle charging station (EVSE)
Product Specifications
(CCS-2 Vehicle Connector)2
1. (Plug type and description)
Basic Product type Rated Voltage/Current Cable Spec. Outer diameter(mm)
E121-40531X 80A 1000V 2×16+16+6×0.75 ∅18.5±0.5
E121-40631X 125A 1000V 2×35+16+6×0.75 ∅24.0±0.6
E121-41331X 150A 1000V 2×50+25+6×0.75 ∅28.0±0.8
E121-40731X 200A 1000V 2×70+35+6×0.75 ∅33.0±0.8
E121-40831X 250A 1000V 2×70(73)+35+6×0.75 ∅33.5±0.8
2. Products Description):
> iec62196 - 3 - 2016 (Standard:IEC62196-3-2016)；
> Overall waterproof performance of connector is higher
than IP67)；
(The product appearance
design novel, the product conforms to the man-machine engineering, comfortable grip,
convenient when operating;)
> ( Contact resistance and temperature rise of pins and ferrules still meet the
requirement of IEC62196-2016 after 10,000 cycles；)
> ( The design of the internal structure
of the product is concise but not simple, which conforms to the actual production needs)；
CCS-2 Vehicle Connector
( Enclosures material used the new high-level engineering plastics, in harsh
environments still can maintain product stability and functionality).
3.(Technical specifications)
(Electric Properties)
> (Rated Voltage) 1000V DC
> (Rated Current) 80A/125A/150A/200A
> (Withstand Voltage) 3500V AC,@＜5mA,&1min
> (Insulation Resistance) 1000MΩ@500V DC
> (Contact resistance) ≤3mΩ
>
(Working frequency) 50Hz
(Mechanical Properties)
> (Insertion force) ＜100N
> (Mechanical life) ＞10000 次
(Operating Environment)
> (Operating Temperature Range) -30℃～+50℃
> (Environment Temperature Range) -30℃～+105℃
> (Pollution Class ) 2
(IP Rate)
> (Degree of protection) (IP54 mated)
(IP55 unmated)
CCS-2 Vehicle Connector
(Size)
(Safety information):
(Make sure that the CCS-2 plug is properly located in the charging station in
order to avoid impacts, drive overs or any situation which could compromise the
usability of the system.
C=1500±3%Ω 0.5w
6.(Implementation standards)
> IEC62196-1-2016
> IEC62196-3-2016
> EN61851-1-2014
> IEC 62893-4-2017
The connector is not suitable for making and
breaking an electrical circuit under load. It shall be equipped
with interlock (retaining device) after the completing assembly.)
